- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
- 受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动角测定仪
-
塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝松装密度测定仪
-
表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高额定电压小瞬时电流经过多次实验发现仪(耐焊弧经过多次实验发现仪)-(折算机控住)
High voltage low current tester (arc resistance tester) - (computer control)
企业产产品标题称:耐电弧试验机
Product name: electric arc resistance tester
软件参数:NDH-A
Product model: NDH - A
要求标准单位:GB/T 1411-2002《液体绝缘层村料耐高偏低感应电流电孤蓄电池放电的校正》(共同IEC 61621-1997)及ASTM D495等原则的需要制定营造的,并完全符合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
重要落球回弹试验仪,介电击穿强度测定仪及技能:
本经过多次实验发现机是都按照使适用于交流接触器、电器开关落球回弹试验仪,介电击穿强度测定仪和家居电器开关落球回弹试验仪,介电击穿强度测定仪等行业领域的焊工用食材、树酯胶和隔热层漆等隔热层食材的耐焊弧功效划分,主适用于固态物体隔热层食材如:食材、塑料膜、树酯、白云母、工业陶瓷、窗玻璃、隔热层油、隔热层漆、硬纸板等有机溶剂的耐焊弧功效测量;
本检测机由计算出来机操作运作,都可以出现现阶段调查程序及调查時间,调查结尾后并另存现阶段调查参数,并可打印文件.标淮实验所报告书。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该设备为上分离式架构,下边为使用软件,上半部为检测箱。
2 本产品的选用*新智慧抑制技木,在选择编译程序(IEC或ASTM)可自功对其进行耐压试验,并在计算机上展现应力测试步骤和后果。
3 **性能参数较好,抗干涉效果强,检测表面粗糙度就越高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 焊弧通断时间段计算误差:超过 ±10ms
2 调压器使用量:2kVA
3 額定检验电阻:12.5kV
4 检测的电压高精准度:±3%
5 电压控住定位精度:±10% 电压电流预估高精度:1.5%
6 电极材料对试件压:(0.5±0.05)N
7 电级涂料:钨棒
8 电极片时间:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 便用氛围的温度:(23±2)℃
10 利用自然环境对温度湿度的:(50±5)%
11 电源线:220V±5% 50Hz
12 测试 最简单的方法: 标准/美标/10 mA 多次/20 mA 不断/30 mA多次/40 mA连续不断
13 疲劳试验方式下列:
| 过程段 | 电孤直流电 mA | 弧光通断用时s | 各程度段持续保持时段s | 疲劳试验总日期s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 反复通 | 60 | 240 | |
| 5 | 20 | 连续不断通 | 60 | 300 | |
| 6 | 30 | 连续不断通 | 60 | 360 | |
| 7 | 40 | 反复通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 号码 | 命名 | 数据 | 提示 |
| 01 | 耐电孤测试图片仪 | 一款 | |
| 02 | 电级平台 | 一台 | |
| 03 | 电极片网架支座 | 有一套 | |
| 04 | 电原拖链电缆 | 两套 | |
| 05 | 地线放** | 一枝 | |
| 06 | 直流电压毫安表 | 一种 | |
| 07 | 手机测控小软件 | 一台 | |
| 08 | 钢材拉伸试验架 | 一套 | |
| 09 | 金属电极空距标准单位块 | 2块 | |
| 10 | 的视角要求块 | 2块 | |
| 11 | 瓷质片 | 2片 | |
| 12 | 喷墨复印机 | 1台 | 知名品牌 |
| 13 | 来服务器 | 1台 | 茶叶品牌 |
| 14 | 食用解释书 | 1份 | |
| 15 | 通过率证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 产品设备应用:
NDH-A 耐焊弧实验仪-微机把控好
NDH-B 耐脉冲试验报告仪-手触屏把控好
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!